elgin watch owners manual

elgin watch owners manual

The last Elgin movement made in America was produced in 1968. In between, pinning an individual Elgin down to a specific year and model can be a bit of a chore. We are severely handicapped by both the lack of legacy production records and by Elgin’s policy of not giving names to models. Starting around 1932, Elgin used model numbers to identify unique case designs. In the 1950s, the use of model numbers was supplemented by individual model names. (The model numbers remained, however, and are the key to finding replacement parts for Elgins of the period.) The only exceptions to this are the related or subsidiary brands, (discussed further on the “ About Elgin ” page). Prior to the 1960s, the inside of the case back will typically be marked with “Cased and Timed by the Elgin National Watch Co.” The presence of a signed crown will add another piece to the puzzle, however, they were not used for all, or even the majority, of models. Your best bet for verifying whether you have a private label Elgin is to search or browse the NAWCC’s Private Label Database. The key to the identification process is to pay attention to details. All watches of a particular model had the same case style (though the material may vary, i.e., yellow gold vs. coral gold). Pay close attention to things like the shape of the lugs, or the lines (or lack thereof) on the case. To a lesser extent, dial features, like the placement of the second hand and the shape of the sub-seconds (if any), are also very useful indicators. Model names were not stamped on the watches and our only clues to these is through other collectors, or through visually matching watches with advertisements and (scarce) catalog materials. This is possible because Elgin watch movements were numbered sequentially. We know the sequence numbers with confidence up to the end of 1955; these numbers are presented below.http://cyyst.com/upfile/deleting-ie-cache-manually.xml

• elgin watch owners manual, elgin watch owners manuals.

To establish the manufacture date of your movement, simply obtain the movement number then check it against the table, below. Sometimes movements sat on the shelf for years before being inserted into a case and put into distribution. In other cases, a movement may have been replaced in the intervening years. (There is no way to correlate movements to particular cases.) One of the challenges you will quickly discover, however, is that definitive information about older watches is often hard to find. Information resources are scattered among numerous sites and the quality of that information often varies widely. While there are organizations that concern themselves with vintage watches and horology in general, their primary focus is not on developing research resources for particular watch brands. As a result, the burden has fallen to collectors. We share here some of the resources we have discovered over the years. Use the links below to find more information about each of the brands. The company grew out of a hobby, albeit a rather obsessively serious hobby. I began by collecting pre-WWII Hamiltons, but my attention soon shifted to the wider field of firms that were competing with Hamilton, particularly Elgin, Bulova and Gruen. Our Retail Store is Safely Open to the Public as we have implemented numerous safeguards and provide a no contact experience, and Our Website and Online Business is also Fully Operational. Battery-powered watches should not be left unused for extended periods of time — a battery should be replaced or removed before they burst or leak acid, which can cause serious damage to the watch movement. A battery will generally last at least 1.5 - 2 years. Instructions for winding will be detailed in the next section. A full wind is required before wearing the watch and should typically last between 24-36 hours. Most people generally wind their watch completely each morning before putting it on their wrist.http://ekinyalitim.com/depo/sayfaresim/deleting-ie-history-manually.xml

These automatic or self-winding watches possess a rotor or bumper mechanism that will move and automatically wind the watch based upon ypur wrist movement as you wear the watch over the course of the day. If you and your wrist are sufficiently active while wearing the watch throughout the day (for at least an 8-hour period), the watch should maintain a power reserve for between 24-36 hours. Turn the crown forward (clockwise) with a long stroke. The crown will turn in in both directions, but will only wind in one direction: clockwise (or forward). To fully wind a watch requires 15 to 25 full 360-degree turns (this will vary depending on the watch). A manual-wind watch should be wound until resistance is felt and the crown will no longer turn clockwise, whereas an automatic watch can be wound forever without risk of damage. Your fully wound watch should maintain a power reserve and will run for at least 24-36 hours. It is not necessary to wind the watch if you are not wearing it that day. These watches are rugged; do not be afraid of “overwinding”. If you wear an automatic watch every day for 6-10 hours and your wrist is reasonably active within that period of time, the watch will still be running when you put it on in the morning, because the movement of your wrist will build up an 8-10 hour winding reserve. If you do not wear it for a day or more, the watch will stop as the reserve will be depleated. Then set the time and wear it normally. An automatic timepiece can be wound indefinitely with no damage to the watch, however, 30 complete 360-degree turns should give the watch a full wind and any further winding would be unnecessary. You can set the hands. You can set the hands forward or backward. With these watches you will first need to unscrew the crown, rotating the crown counterclockwise until it is removed from the tube threads. You will then be able to gently pull out the crown to the final notch and set the time as with any other watch.

After setting the time, screw the crown back on by pushing the crown in toward the case while simultaneously rotating the crown clockwise. At left, the crown is fully in and ready to wind. At right, the crown is out and ready to set the time.At right, the crown is un-threaded and pulled to the farthest notch. The hands may then be manipulated to set the time. When new, many of these watches were designed to withstand a fall of no more than three feet on to a raised wood surface. Now that these timepieces are much older, their parts may be rare, costly, or not readily available to replace. Though a watch may appear completely intact after a drop or bang, damage may be much more extensive internally. Even a slight bang can cause serious damage if impact occurs at the right angle. Many vintage watches were not equipped with gaskets to prevent exposure to moisture. Exposure to steam is potentailly more damaging than water exposure. Bring the watch in to us for service AS SOON AS POSSIBLE: any delay could cause further damage and corrosion to the watch movement. These oils and alcohol can potentially react with the metal of your watch or enter the interior of the watch and interfere with the delicate balance of oils within your watch. Most frequently, magnetism is the cause behind a watch running abnormally or often excessively fast, slow, or stopping altogether. When most vintage watches were manufactured, people lived in a world with fewer sources of magnetism and electricity — no laptops (huge battery beneath the keyboard), mobile phones (large battery behind the screen), metal detectors at airports or court houses, or even purses with magnetic clasps (many purses today have magnets on the fastener, which your watch will pass by every time your hand reaches in). (Note: Quartz watches are immune to magnetism.). After a long day at work, a person might come home at night and then place their watch on top of the TV set.

In today’s world, you might accidentally leave your watch on top of a closed laptop or notepad or have it scanned by X-Eays in aorport security. Try to wear your watch when passing through metal detectors (ask to wear it during a body scan) and avoid putting your watch in direct and prolonged contact with batteries, electrical equipment, and magnets. When passing a wristwatch very close and slowly over an analog compass, the directional compass indicator should remain completely still. A magnetized watch will cause the indicator on a compass to move or spin. Magnetism can most often be quickly removed using a “Demagnetizer” which can be purchased online. In certain rare occasions, a watch can become so magnetized that magnetism can only be removed by disassembling the watch and demagnetizing individual components. Remember, we didn’t make these watches, ultimately we are just attempting to make them work as well as (or better than) they worked when they were first manufactured. Just gently and slowly pass your watch over the compass, keeping your watch very close to, but not touching, the compass. If the compass hand moves, your watch has some magnetism in it, which magnetism should ideally be removed. (At right:) Our favorite demagnetizer, a vintage piece from the 1930s. More modern examples can be purchased inexpensively online. When keeping your watch in a safety deposit box (hopefully you have chosen a Safe deposit box located on a higher-level), it is best to wrap the watch in paper towels and place the watch in a resealable plastic bag. Ideally, one should place moisture absorbing silica gel packs with the watches. Do not store a Quartz watch for long periods of time with a battery installed in it, otherwise the battery may leak, corrode, and severely damage the movement. We strongly recommend you continue to bring us your watch for periodic service or repair. Watches, like cars, have oils which over time, dry up, coagulate, or get dirty.

Certain parts of a watch are maintenance wear items that require periodic replacement, similar to a car’s oil filter, and therefore these parts should be replaced every so often, particularly the mainspring and the gasket rings. A mechanical manual wind or automatic self-winding watch typically should be serviced every 3-5 years. If the quartz watch is malfunctioning, it could be a circuit issue — either the problem will be serious and parts will need to be replaced, or it may just be that the circuits need to be cleaned and the watch's internal parts re-oiled. In either case, the best way to troubleshoot the watch is to have a new battery installed and to wait for the issue to recur. If a battery dies within 1-2 months, it typically is indicative of a circuitry issue. Small errors in accuracy can occur by the positioning of your watch, even when it is not being worn (I.E. a watch set upside-down or on its side will run differently than when the watch is left dial-up). If the watch watch is not keeping time and is not accurate there may be a power reserve issue which should be addressed by our watchmaker. Sometimes it can be wise to give an automatic watch a little “jump start” by winding it manually eight to ten full 360 degaree winds before wearing the watch, especially if you have not worn the watch for a number of days. Try passing it over a compass to determine if it has been affected by magnetism. If you reset your watch and it runs for a while but then stops repeatedly at specific times, a number of issues are possible. Bring the watch in for inspection as soon as possible, as any number of issues could be the cause. Bring the watch in for service as soon as possible. The watch may have a broken balance wheel due to the watch being banged or dropped, though any number of issues could be the cause. Bring it in for service as soon as possible.

If your manual-wind watch can be wound “forever”, without ever coming to a stop, this is almost always indicative of a broken mainspring. Mainsprings are a wear-item in a watch and should be replaced periodically. Even a new mainspring can sometimes become faulty. If your manual-wind wristwatch has this problem, bring the watch in for service. Rust or dirt are typical causes. Alternatively, the oils in the watch may be completely dry or dirty. Whatever the case, bring the watch in for inspection. Our watchmaker should be able to fix this issue relatively quickly, and in a worst case scenario, new correct replacement hands can usually be obtained for the watch. Because this is generally an indication of impact, there may be further complications or damage to the mechanism of a watch. Be very careful not to excessively shake a watch in this condition, as the loose hands could scratch the dial of your watch. A cracked crystal should be immediately replaced to prevent moisture and to insure the integrity of the watch. Natural “crazing” often occurs on an old crystal and should not be an issue — it is best thought of as the crystal’s natural “patina”. Light scratches on a plastic or acrylic crystal can be very easily buffed out via a polishing machine, but deep scratches may be permanent and require replacement of the crystal. Scratches on Glass and Sapphire crystal cannot be polished out. A watch should be cared for and looked after, but most importantly, all of the watches we sell are made to be worn and enjoyed. Do not panic if you are experiencing issues with your vintage wristwatch: we have never encountered a problem which could not be fixed or reversed given sufficient time. These crystals can be identified because they are typically flatter and more flush with the case than the more bulbous or curved plastic crystals.

Though more scratch resistant, there are several drawbacks to sapphire crystals: 1) When a sapphire crystal is scratched, the scratch cannot be buffed out, and the crystal must be replaced. 2) If dropped, a sapphire or glass crystal is more prone to shattering than a plastic crystal, which will more typically just crack. If a crystal shatters, shards can scratch a dial, or potentially enter a movement and cause havoc in the gears. In any case, some people prefer the vintage aesthetics of a more curved, plastic crystal, to the more flat sapphire material. That said, if requested, a polish is complimentary with any full service from Second Time Around Watch Company. Typically in the case of vintage wrist and pocket watches, the movement will not be visible. Some examples of complications include a calendar function, a chronograph function, or a moonphase complication. This is typically accomplished with several “pushers”, or buttons on the case which start, stop, or reset the separate timing mechanism. Time is typically recorded through a center-sweep seconds hand and one or more subdials that maesures minutes and hours. Typically these watches were only meant to time events of short duration, and leaving them running can cause unnecessary wear to the mechanism. These watches account even for leap years. Unlike a perpetual calendar, these watches will need to be manually adjusted at the end of every month with fewer than 31 days. It involves placing the escape wheel, escape lever, and balance wheel in a cage which rotates as part of the escapement process. Under these circumstances, the escapement of the watch movement never spends a significant amount of time in any one position. There are several varieties of repeater, named by the smallest unit of time which their chimes indicate: quarter (of an hour), half-quarter (of an hour), five-minute, or minute. This technique predates electroplating, and results in a thicker layer of gold than most other plating methods.

It is not typically used with watches today. It is a thinner coating than via gold-filled. It is therefore made in various “karats” (K), which are proportions of gold. In wristwatches, these are typically 9K, 14K, or 18K gold. Are more jewels better? Though “jewels” were originally created by a process of piercing precious gems, since the early 1900s, most jewels are synthetically-created rubies or sapphires, which have very little inherent value. Typically most modern mechanical wristwatches will have at least 17 jewels, but more or fewer jewel counts are not uncommon. A watch with a higher jewel count will usually have more complications and more working parts. A higher jewel count watch may in general be more accurate (although probably not terribly noticeably), but it is also similar to a sports car: because there is more going on internally, it should generally be serviced more often. Do I need one? If an automatic wristwatch is on a watch winder, its power reserve will not run down and it will not have to be reset. A Quartz or manual-wind movement will not benefit from a watch winder. The reason for this is that there is oil in a watch, and if your watch winder only spins in one or two directions, the movement will not be evenly lubricated, and certain parts of the watch will wear faster than others. For this reason, we do not sell watch winders, and recommend winding your automatic timepiece through normal wrist-wear. Do older watches have it? When dropping an older timepiece, it was not uncommon for the balance staff, which holds the balance wheel, to break. Originally, most vintage watches were built to withstand an approximately three foot fall on a raised wooden surface. Even a slight bang can cause serious damage if impact occurs at the right angle. Shock resistance technologies, which typically hold the balance wheel via spring suspension, have only gotten better with time.

Although watches with unsigned cases may be original, they typically are not as desirable as factory-cased and factory case signed watches. After you change the battery, you need to reset the hands so that the watch functions properly. Select chronograph function. It's water proof to 30 meters. Stainless Steel There were many different models of these programmable clocks manufactured and the instructions differed. And they are just not. The time and the chimesThe time and the chimes do not synchronize. There are two buttons on back of the clock, one black and one red. Which I believe are used to synchronize the. It doesnt have a manual. It has two buttons on the right side with a crown in the middle right. It needs to be told EST signal helP? From: From the company Contact Us web page, this is the phone number to call: (718) 472-7500 ext. 7546 Long Island City, New York. The pendulum swings. I do not have an instruction book on it so I do not know if it requires two AA batteries, and if so, do you have a picture Answer questions, earn points and help others. The entire Esembl-o-graf series of books is a great resource.This will allow you to type in the grade of your Elgin pocket watch, and show you all the part numbers for the various parts. You can also type in a part number and get a list of all grades using that part number. Here and here. Color pictures, dimensions, power reserve Click here to see their titles. Valjoux, Eta Sa, Hamilton Watch Company Original, Blancpain, Certina, Mido (watch). More information here. Maybe I can help. Take a lookGrade 760 is the basic grade, and in the main, This is not The pages themselves, and the Manual, Contact Jeff Sexton, at. The company sold watches under the names Elgin, Lord Elgin, and Lady Elgin.Initially, as part of the deal, the city was asked to donate 35 acres (142,000 m?) of land for construction of the factory.

Four Elgin businessmen agreed to purchase the property and then donated the required 35 acres to the watch company. The company was re-organized in April 1865 and the factory was completed in 1866. The first movement, delivered in 1867, was named the B.W. Raymond in honor of Benjamin W. Raymond. The watch was an 18 size, full plate design.The company produced many of the self-winding wristwatch movements made in the United States beginning with the 607 and 618 calibers (which were bumper wind) and the calibers 760 and 761 (30 and 27 jewels respectively).However, additional plants were located in Aurora, Illinois and Lincoln, Nebraska. The original, obsolete factory in Elgin closed in 1964, after having produced half of the total number of pocket watches manufactured in the United States ( dollar-type not included). A leased building in Elgin that housed offices as well as casing, fitting, shipping, service, and trade material departments was maintained until about 1970. The rights eventually were purchased by MZ Berger Inc., which manufactures its watches in China and distributes them outside traditional watch dealerships. Elgin-branded watches produced after 1968 have no connection to the Elgin Watch Company.Retrieved 9 January 2019. By using this site, you agree to the Terms of Use and Privacy Policy. If you’ve always wanted to own a piece of functional American history, without breaking the bank, then a wrist or pocket watch from the Elgin National Watch Company may just be exactly what you’ve been looking for. By way of context, pork chops were selling for three cents a pound at the time. Back then, the business traded under the name “National Watch Company,” but this would later be changed to the “Elgin National Watch Company,” as most of the watch trade and public referred to its products as “watches from Elgin.” The underlying idea was to mass produce high-quality pocket watches using machine-made, interchangeable parts.

By today’s standards that seems like a completely rational, if not obvious approach, however it should be noted up until around 1850, watches were made mostly by hand. If one part of a watch broke, someone with the right tools and skill-set to make a replacement would need to fix it, a potentially time-consuming and expensive process. For example, the company produced its first wristwatch around 1910, many years before most other American watch companies. Likewise, Elgin designed its products to be easily repairable and with so many spare parts produced over the course of its 100-year history, its watches can still be bought and fixed reasonably easily even today, making them popular collectibles for enthusiasts. Plus, the high-volume of production has meant that the prices for collectible Elgin watches have stayed relatively low, ranging from a few hundred to a few thousand dollars depending on the make and model. Many were Railroad Watches or “standard watches,” as they were often called in the railroad industry, designed to meet railway standards. A railroad pocket watch was generally considered to be one of the highest grade watches available at the time, responsible for ensuring the burgeoning railway system ran on schedule. Depending on your preference, you can choose between open face pocket watches or hunter pocket watches, the cases of which generally cover the entire watch face. There are a few half hunter watches that allow viewing of the clock when the face is closed, however, these are less common. The pocket watches often have engravings on the bezel or hunter case, which not only look nice but also help to determine the era in which they were made. It’s worth noting here that only about 10% of cases ever sold were solid gold. The company also produced military watches under the A-11 production standard, along with other American watch manufacturers such as Hamilton and Bulova.

The “official” version of the A-11 was the one made by Elgin, as documented in TM 9-1575 from the War Department. This is the ordinance maintenance guide for wristwatches, pocket watches, stop watches and clocks, published on April 6, 1945. These watches played a critical role in helping the Allies to victory and the Elgin Company was awarded ten Army-Navy “E” awards, for fulfilling contracts ahead of schedule. Produced over a number of decades, the Lord Elgin watch came in several different forms, including square, circular, and rectangular cases, and the general style was always one of elegance and refinement. What is perhaps most interesting about these watches from a collector’s point of view is the variety of examples available. You can literally have a collection solely of Lord Elgin watches with no two models being exactly the same.Wondering what your Elgin watch is worth. Click here to have it appraised by experts. Please try again.Please try again.Please try again. Then you can start reading Kindle books on your smartphone, tablet, or computer - no Kindle device required. Register a free business account To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzes reviews to verify trustworthiness. I'm sure that you'llI've restored hundreds of vintage Elgin wrist watch over the years and look forward toIrrespective of the current state ofElgin watch is serviced and repaired to reverse generations of use, it's not at all uncommonElgin wrist watches were and are considered some of the finest instrument made by man. The brain trust that Elgin relied on to make these fabulous timepieces can compare withThe measurement of time is an veryRepair page: Lord Elgin jump hour direct read watches, Elgin Shockmaster watches, Elgin military watches.

Elgin diamond ladies watches, Elgin art-deco watches, Golden Clubman, Micromatic, Durapower. Elgin pendent watches, all Lady Elgin wrist watches, Golf Ball model, B.W. Raymond railroad Elgin Deluxe, Elgin Adonis, Elgin Streamlined, Elgin drivers watch, Ristflo, William Osler. Mermaid design case, Elgin lighter watch, Crusade, BMW logo, Elgin USA military, Canteen case. Elgin Official Boy Scout model, Rolland Fischer, Black knight, gold knight, Elgin Avigo, Doctors,Elgin wrist watch. I've thousands of satisfied customers over the many years that I've beenThanks for enjoying this page dedicated to ElginAll material on this Website, including text, photographs, graphics, code and or software, are protected by international copyright and trademark laws. Unauthorized use is not permitted. You may not copy, modify, republish, reproduce, post, distribute or transmit material on this Web Site, in any manner. Second's subdial at 6 o'clock. 14ct gold. Weight 72.16 grams. Gold filled curved chain weight 15.55 grams. Gold dust plate, diameter 3.4 cm, total 33gm. Engraving to interior 'W.J.Smith'. In original fitted case. 109gm. Length 35 cm Circa 1886-7. Approx case diameter 40 mm. Watch working when tested Comes with a gold plate fob chain Some cracking to the enamel dial Retailers, movement marked 'Elgin Nat'l Watch Co. U.S.A', subsidiary seconds dial. 3.5 cm diameter Manual wind mechanism was working when tested Blued steel hands, white dial with subsidiary second dial. Stem manual movement. Was running when tested Total weight 32gms. Glass missing, not working Dial and movement signed. White enamel dial, black Roman numerals, subsidiary seconds. Engine turned case. 18ct yellow gold. Total weight 109.04 grams. Dial and movement signed. Cuvette engraved 'Mr Kenneth Mercer'. 14ct yellow gold. Jewelled to centre with bi-metallic balance and micrometer adjustment (21 jewels) diameter 49 mm. Engraved back cover and bezel. Enamel dial with oversize Arabic numerals in good order.

Enamel dial in good order.Case number 81323. Weight: 59.1g. Comes boxed Diameter 34 mm In working order. Diameter 48 mm Manual movement, in good working condition. Crown wind Swiss leav1er rolled in gold case with chased decoration, circa 1900, Liverpool jewel set in gold, 19 jewel. Diameter 5 cm. All original Elgin timepieces are mechanical watches. Elgins produced today are not related to the original watches. Contemporary Elgins are automatic mechanical and quartz timepieces. The three versions of Elgin watches are set in a similar manner. Setting an Elgin stem-set pocket watch. Pull the stem out of the crown at the 12 o’clock position of an Elgin stem-set pocket watch. Rotate the stem clockwise to move the hands to the correct hour and minute. Depress the stem and wind the crown to keep the watch running. Setting an Elgin lever-set pocket watch. Unscrew, counterclockwise, the bezel holding in place the crystal on the watch case of an Elgin lever-set pocket watch. Removing the bezel and crystal allows access to the small lever behind the dial usually protruding from the 5 o’clock position near the case edge. Pull the lever. Rotate the crown clockwise until the hours and minute hands are set. Push the lever flush with the case. Rotate the crown again to wind. Replace the bezel with crystal by rotating the bezel clockwise into the case. Setting an Elgin wristwatch. Pull the crown out as far as it will go on any Elgin men’s or ladies wristwatch manufactured before 1964. Set the hour and minute hands to the proper time and depress the crown flush with the case. Rotate the crown clockwise to wind the watch, according to Trusted-forwarder.org. Setting an Elgin date watch. Pull the crown to the first position of a date model to set the date. Elgin produced very few date watches, but some models do exist. Rotate the crown clockwise until the desired date is reached. You may have to go through all the numbers to reach the correct date.